Righto… had some requests to see the new bench.
This project arrived at the worst time (weekend after AKgelblaster shipment!)
So bit of a low effort video of the new bench workshop, and a thank you for all the support and one year of youtoobing.
Cheers everyone.
Hopefully can get some work done and review videos out this weekend and week!
Nice work Rok, such a great feeling getting your kit organised. I’m much more motivated to work when it’s clean and tidy 
I watched that yesterday, I was first to like ner ner beat ya beemer 
So funny, I backfired again. 2026 lets go 
I was right behind ya mate, 2nd like on the video I think 
Great work @RokSolid , but like I commented… where’s the Beer Fridge!
Definately need a first aid kit keep the hydration up 
Judging by the Great Northern on the workbench, the beer fridge can’t be too far out of Rok’s reach…
Give that man a beer
Bit of an odd time for me to punt out a video but Uzi… with stock review!
These came Friday, via a trial shipping method in VERY low quantity. Actually at time of writing there is one left! If it’s you buying it, an awesome customer that didn’t want his drum has offered to throw in the drum to make it a full package!
And it’s gone while I write this… Wow. Can’t make it up!
Anyway… for you viewing pleasure ave a watch.
Sten and Draco soon, and something very unique too!
And for those of you still waiting for the stocks, hopefully here soon they are on the way.
Thanks everyone!
Butt stuff…??
Ohhhh wait…
You said Butt Stock…!!!
Dont let @Maiphut backfire, and fill in the gaps…!!
Bend it, like Beckham…!!
Couldn’t resist…!!!
That looks nice, like the real one, well done. Funny as yet again, chop chop, snooze you loose I say 
I’ll bend something in a minute haha
All jokes aside ( that wont last long), its good to have a folding stock model available.
Even in the airsoft world…the folding stock models are scarce, and usually limited to the high end expensive models.
Some have a mock folded stock, that doesn’t extend
Here, we get a good quality, detailed nylon model, with the metal stock available…
Stock fps can be low, … but fixable, to a decent SMG appropriate level.
Good stuff…!!
A video… okay!
I am currently restricted to review videos, so have one!
Review videos normally entail me buying the blaster, or using a blaster that has come in for an upgrade prior to work being done.
On that note, a huge thanks goes to @BME for this one!
I can’t really do my normal tech work videos now, I can only really show before and after which doesn’t suit me as I am not really (try not to be at least) a dick swinger.
That said, review videos typically are expensive for me as I am normally buying the blasters reviewed, and some older review videos of mine contained information so they have been removed.
Thanks to the legislation of imports, we lost far more than we made in the 6 months of AKgelblasterAU’s existence, so for now I am just doing what I can to get back into the black.
If you want to help the channel or me, grab something from AKgelblasterAU.com
or… send me a blaster to review.
More importantly, keep emailing senators and MPs with your concerns.
Thanks everyone for the support over my time, which isn’t over yet.
Where’s the good stuff.??
ridiculous these are considered firearms… armorers license required…like, really…!!
Anyway, i’d like to test the “Alternative Metal Rod stock”…
But, it wont come off my other sten…too tight fitting
I suspect the metal rod stock would need some fettling to fit…which would then make it looser, to get it on/off … and then wobbly…
But, I reckon the original was probably wobbly too…or , it varied on each one made.!!
These were good, for value / price point…
Made my first model look like rubbish…if only i knew…!!
250 fps, vs 160 fps…
Mags that work, vs mags that dont…
Affordable, vs expensive…
Oh well, the joys of being an early adopter.
On a side note, the mag on my M110 is not working/ feeding.
Ive tried a 9v test battery, with alfoil to build up the recessed mag contacts, but no joy…
Looks like the mag doesn’t come apart easily…base looks to be glued on.
Had any of your mags apart yet.? or issues with them…
“it wouldn’t be gel if you didn’t have to screw with it”… T.M.
I have not had much testing with mine and it’s mags as the thing is a mongrel. Yours came together well and easy… mine has been an arswhole every step of the way. Because gel I guess?
Long story short waiting on a mosfet to arrive to get the trigger working properly. It was heavily used in stock form and it has just led to get ride of the trigger block and cut off lever as it hasn’t played nice with aftermarket parts, and the stock ones are too far worn.
I do recall yours having a terminal wire break, check the terminals are getting power with a multimeter if you can?
Ah, it’s nice to see you putting content up again, Rok!
250FPS is pretty damn good for a little gearbox like that, gotta say.
Makes me think it’d be a good candidate gearbox for an E-11 build.
Good to see you back on the Tubes
Hmmm…
The mag Wasnt passing, the 9v battery test this morning…
now it is…
lets see if it fires…
Whats the phrase that pays…??
" It’s not gel, if you don’t have to screw with it.!!" (T.M.)
Still, progress i suppose…
Was going to comment an hour ago, but switched to YouTube to watch your video to allow me to like and comment, then got sidetracked with rewatching some of your older videos again!
Great idea doing some reviews and I’m sure that there’s plenty of people able to help out with a few little gems.
A good way of keeping things ticking over until we get some legal clarity on things.
So sorry to hear that you and AKGelblaster took such a hit through this whole shitshow.
