Paddlepop haven’t had one of those for a while 
I don’t want it stuck to your finger though.
I usually use tooth picks to apply. Small amounts.
yeah…bunnings sell whole packets of paddlepop sticks, as stirrers…
Handy for various tasks.
Also, i have dental material applicators on hand as well…tiny, disposable plastic applicators…
and use gloves.
1 Like
You’ll figure it out champ.
I effed up one day and the fertilizer spreader went arse over tit. Broke the whole plastic hopper. Gorilla glue applied so I could get back in action. Was up all night sorting that out.
Got it done 
Pretty sure Low Guido has a video on these.
From memory… massively over volumes and poor seals. Anything you do is gonna be under volumes on this one though! I’d bet it would take a vector nozzle… 
Either way no matter what you do the tiny barrel is gonna be hard to get any decent fps out of.
It was a challenge to get 280 out of the 14cm APC-9K barrel, this will be on another level.
1 Like
I’d settle for 240 fps, and feeding properly…!!
Here it is, for reference…
He got it up to 270 fps, in the end…!!
Yeah, as @Maiphut pointed out, only need a light smear and leave for 12 hours to set properly, but it is a strong bond that remains flexible, unlike CA based glues or Epoxies…
How do I know?
Because it’s the only thing holding a couple of my Airplanes together for months now!
Haha I use CA glue to stitch wounds together. I tried a finger one day, sort of worked 
Still had to call in the Para Medics anyway. Got him stabilized so that was important. In the mean time.
Hot tip:
Don’t wear a knitted woolen jumper when operating a high speed Dremel with a wire wheel attached.
I now feel like an Echidna with its skin turned inside out!
Hang on I thought you were the doc
Was funny one day was going to have a quick beer with my doc mate. He was on call though. I was driving, he said hang on a minute getting spooled up here. Where the f is that joint.
Boom selector 100m behind me, oh right. Hit the warning overide button and tromped it.
Poor young fella was siezuring and several heart attacks as doc was bump starting him on the spot. Called in the Para’s, but sadly doa.
Ok…
20hrs of setting time, time to give it a test fire.
First things first.
Paint / black out all those visible wires…
Nothing to see here…
So, how’s it go.?.?
1 Like
That’s from a M95, with the extended barrel.
I could try a M100…but the larger Rattler spring jammed regularly on it…
And it did 340 fps, on a M95.!!
This should keep it running OK, and stresses down.
The gearbox is also a bit loud… so this will help.
The new spring will settle down…and probably be a solid 270+ fps blaster.
FPS can vary… ive seen some 240-250…but most 270+…
ROF is a bit lower…but that’s okay, coupled with a smaller mag.
Accuracy is good, the barrel is stabilised quite well, with its tight barrel holder.
I dont have the " dart launcher" Low guido has…my inner barrel is about 2 cm shorter than his, and the tip hides within the birdcage…not protruding.
The initial feeding problems, must have been due to a “slowly flailing, and failing” nozzle…which eventually came off.
it still does have some feeding issues occasionally…but a prolonged auto burst usually clears the throat.
Like wise, the very occasional shredded gel…go for harder gels, ie ihobby blues.
1 Like
Final verdict… Me Likey…!!
What i like about it…
1: short form factor, Shorter than a compact UZI…with better performance.
2: stock easily removable, for even shorter length.
3: Very solid build, and light weight. Stock extended is super solid.
4: funky, chunky mag design.
5: mag prime.
6: cheap price.
Not so great…
1: Failed Nozzle…i guess the blaster is 3 years old…older glue fails.
2: Shortest barrel i’ve ever seen…!!
My pistol packs more inches than that…!!
LeHui…what were you thinking.?.?
Replacement mandatory… but easy…no glue reqd.
3: need slimline 7.4v battery to fit into compartment.
11.1v would struggle to fit.
Nylon comparo round up so far…
Long rattler…340 fps…m95…bigger M4 mag( proprietry)
PDX … 320 fps…M100… M4 mag ( standard)
Mini rattler… 275 fps…M95…Custom mag.
Mosfet Mini rattler…300 Fps…$$$…
The Nylon builds, are good value for $$.
Grab whatever flavour you like, while full auto is in stock…!!
I’ll grab a few more mags…
i’ll test first to see if they are wired backwards…!!
Good stuff there you go
My favourite DJ I have been supporting for a couple years now.
Thought you might get the MCHammer joke. Spannish, I have a lil spot of spannish in me too. Glad to see she is doing well
Bit like Starships were meant to fly by nikki flange. But the Maori pull the Hakka. You don’t challenge them.
Funny or not so funny my uncle was IC of the Nepal regiment under ADF. He got thanked and awarded the Kukri. That is a highly awarded gift for helping them out. They don’t hand it out to just anyone.
As he looked after them and did. What a legend, still is.
1 Like
Say hello to jasmin and james…
Australias richest youtubers…
23 years old…30 million subscribers…$500 000 per month…
doing dance videos.
$11 million worth of property…
Good luck to them…
Shes hot…
He’s punching above his weight…
I’m just jealous…!!
Ah, just what the world needs right now…
More millionaires, and social media influencers and content creators at that. 
Well, that’s just going to enhance and advance society and the evolution of mankind in a myriad of wonderful ways now, isn’t it?
Yep…
you gotta wonder about our values as a society…
When they place such high "value"on a hot chick, who has personality and can dance…
And that’s it.
Mind you, the entertainment industry has alway done that.
Youtube just cuts out the middle men managers…
And offers a glimmer of hope, to the masses…
1 Like
Her looks and abilities will fade quickly and then she’ll have nothing left to offer, but with millions in the bank account I don’t think she’ll give much of a 