Any of you blokes know if you can reset these etus to their default settings?
I have a couple of them. One works okay, but the other has a problem when you try to change the settings.
I wanted to change the time setting for the mag prime.
It should work like this - put selector to semi, pull and hold trigger. It should give one beep at approx 5 seconds (this is where you can change from single shot to 2/3/4 etc), keep holding it until approx 8 seconds when you should hear two beeps. This is where you can change the mag priming time.
Not on this one though. It doesn’t beep at 5 secs, but does give two beeps at around 8-10 secs. The problem is, changing anything here doesn’t affect the mag prime, BUT it changes the firing settings.
When I realized this, I tried to change it back to single shot on semi, but it won’t save that setting. For some reason, it will save 2 shot (double action), 3 shot, 4 shot etc, but not single.
So I want to reset it to the defaults if I can. I have found a few places online that have the programming info, but nowhere that tells you how to factory reset it. (or if that is possible)
No difference. It will give two beeps around the 10 second mark, nothing more after that. I waited 30 seconds or more.
It’s just weird that it will save 2,3,4 or more shots, but not the single.
I’d put the Perun hybrid back in, but it does not like the Solink motor
Yep I’ve got one of these and it took me 10 plus goes to turn the mag prime off. Cant remember what the secret sauce was but one day, by following the destructions, it just happened and it stopped mag priming.
Hey fellas, sorry for the late reply. Haven’t been on here since I posted this yesterday.
I don’t think so. It will fire two shots (double action/binary style), or 3/4/etc (if I set it) on semi, but fires a burst on auto. I might try changing the auto settings and see what happens.
And it worked fine on semi (firing single shots) until I changed the settings, thinking I was changing the mag priming time.
When you went into programming, did you get the single beep at around 5 seconds, and then the double beep at around 8 secs? This one only does the double beep and at around 10 seconds. I did try the other blaster with one in, and it does the single and double beep like it should.
Maybe it just got sick of you farkin around with it
Mmm that’s when I tend to bust out the hammer and fuck it for good.
No fixing that now, in the binski
Comes from my maintenece fitter days with a hot headed director you can fix a 3ft main bearing on a 650T press that the rollers are spitting out of how long, as long as it takes to order in the 20k new bearing. Na you fix it now.
Ok, get the oxy and torch straight through it, see fixed, happy now. Fuck off back to your office and leave it with me, I told you can’t fix it in 2 seconds with no parts on hand. But I can fuck it further as per your request. He started going off, I said dick head I had to torch it out anyway to prep it for the new bearing for fucks sake. Office, now, go.
He was a cockhead director, I said theres the door I’ma start walking out of that fucker in a minute if you don’t pull your fucking head head in and you can take this job and shove it. OH nonnononono don’t be like that. Well fuck off then and let me operate.
He fucked off with his tail between his legs.
The icing on the cake was another director who was decent came to see me about an hour later. He started the conversation with, “so I heard you told Mike to go get fucked”. I said not quite but nearly. He said well I just told him to get fucked so saved you the trouble, doing good here fella anything you need sing out. Both giggling.
