I’m learning to re wiring my cyma gearbox with better wires, but I forgot the original position of the mag prime. So if anyone has a reference image, or know the answer, please help me.
I put red motor wire on the inside, and black on the outside.
Hmmm, not sure why you were compelled to rewire, CYMA wiring is very adequate and the way they rout the wiring through the box is excellent. But anyway…
The mag prime wires run inside the gearbox and out the front. The switch locates on the right hand side of the box just behind the mag terminals. It’s retained by a single screw and is located by a moulded location pin on the box case.
1 Like
I’ll be opening up my metal cyma scar this week… can post a photo of it.
1 Like
There’s these wiring harnesses, image might help decipher what goes where.
They have a number of different harnesses for both forward and rear wired setups.
I’ve bought from this site a couple of times now with no issues, just parts thou.
1 Like
Yeah i was a bit careless when opening the gearbox and broke the mag connector, so i figured i’ll just replace the wire set from plastic to those silver wrapped one anyway.
But alas, i’ve finished to wiring, thank you for the help.
1 Like
Thank you, i’ve finished rewiring it anyway.
Thank you, i’ve finished rewiring it today.
1 Like