The release spring in the stock is way too firm…you break your hands tring to release it.
I unscrewed the mechanism, and cut about 1cm off the stock spring.
That gets it down to a light amount of force required to cycle it properly.
It has blowback…which can be selectively disabled.
If you insert a mag and start firing, the cover cycles.
If you use mag prime, it locks the cover back, and it doesn’t cycle.
If you want it to cycle, you push the release lever to free it.
A nice touch, and a easy way to disable blowback.
The mags are slightly different from the Lehui brand…
Bohan on the left.
The little pin sticking out, moves the gel retaining latch at the top.
Doesn’t quite fit and work properly with different brands interchangability…
Standard performance is around 220-230 fps OOTB.
It prefers the slightly smaller gels…it can jam on larger ones.
The inbuilt hopup works, giving it a bit more range.
it seems to like 11v better.
A bit of double feeding, on 7v.
You have to pull the handguard off to fit the battery.
No biggy, as the push button is on the lower receiver.
Then, remove the supp.
Battery space is a bit tight…shown is the xforce 11v stick…
That carries the risk of rubbing wires etc, so i opted for a smaller 11v.
Less capacity, but it sits further back, no pressure on the supp, and all wiring away from it…
Its super easy to pull apart.
2 pins and its off…split gearbox style…
(forgot to take photo of that.!)
Rear pin out, and it levers up for easy spring changes…
