40mm nade launcher 
Close, it can take 40mm but I’m redesigning that part
1 Like
Tshirt cannon, to launch MAGA shirts…
Couple more parts to print, a cut and some paint and it’ll be ready to use, given the shells work as theorised
3 Likes
Just some finishes to do on shells but she’s have ready, want to make some proper launcher sights for it too.
Update:
Still need to tweak the nerf one but not like I’d be able to use in a game anyway.
7 Likes
Converting the classic army E2 to an E1. shortened the barrel, removed grenade ring off moderator, cut off bayonet lug (rough atm), fill holes on buffer tube to make 2 position only. Plan to use 20rd double bell metal mags. Wishlist is an aluminium rear stock.
Castles have been removed from nut. Taranis Gearbox is fitted with perun v2 hybrid with clicker. Was a pain to fit.
2 Likes
Next project…
Bit more portable than the last one, but it’s not a quick reload, fewer parts too.
Still trying to get a 3D printed gas shell to work for the other one, just sealing issues with the release valve so might be something I’ll need to do in resin for the accuracy. Current version only slowly leaks gas so it’s almost there.
3 Likes
1 Like
German? Milling Machine …… noice 
proxxon mini mill. Taking material off the feed tube to fit taranis into LDT scar H.
So the classic army xm177 now has the LDT ATM gearbox fitted. New outer barrel as well as the ATM comes with barrel adaptor.
5 Likes
Basic paint job, my dumb ass glued the rings and that on before painting to match the breach and CBF masking everything off. Just need to get something for the sling. Fits one of those mini nerf football things straight down the barrel too.
It’s the XE-15 CAT from thingyverse.
4 Likes
Bought the LDT ScarH second hand with a MK tactical gearbox in it. The gearbox bushing holes are beyond repair. Nice gouge from spur gear as well.
So…
Anybody have the ambidextrous controls from the LDT Scar H that they no longer have use for?
1 Like
Wow, that box is cactus!
Never seen something that flogged out like that before…… previous owner must have owned a very large hammer 
That’s a HPA shell isn’t it? What would be the point of bearings tho.
I milled it into a HPA box cause the bushing holes no good
Ahh ok, I can see how the edges have been cut now.
2 Likes
Furthering the adventure of fitting the LDT ATM gearbox into classic army XM177. Needed more room at front of receiver for the bolt to come forward 3mm or so.
Bought a 26mm hole saw and turned some holders on lathe to hold it in place.
5 mins later…
Removed edge with dremel, couple of slips.
Back together for some test fire. Still some points touching.
2 Likes
Does it still count if the project is currently files on a pc thats on my bench?
Smg conversion, uses the lower and barrel of a rifle and a impact grenade i found online, planning on printing and building in the next few months when i get my big filament order in so i can do a fair few colors and no one can say if they find them its theirs.
1 Like
