"Time to lube…
Empty the tube…!!
Grease to burn…
No warranty return…!!"
Old Bing Feng proverb…
![]()
"Time to lube…
Empty the tube…!!
Grease to burn…
No warranty return…!!"
Old Bing Feng proverb…
![]()
Y’know…the newer BF MP7’s do 200 fps, OOTB…
As well as being well detailed units.
It may be worth pulling one apart, to see if extra herbs and spices, can create a zinger…!
You’ve got one of those, haven’t you?
On your mark…
Get set…
Go!
Get into it! In the name of science… ![]()
I’m sure it will be on yours or roks bench in no time ![]()
Well later if it’s rok’s, he’s a busy man these days ya know
Important gel business and all ![]()
Oh fk I back fired again. You guys are too funny.
![]()
hmm … i havent tried the included green gels either. Do you have a recipe for those?
I don’t know about a recipe but I can give you a step by step guide if that helps?
Step one: steal underpants
Step two:
Step three: profit
Wait that’s the underpants gnomes from Southpark
lol … i meant how long under water ![]()
There wasn’t instructions included so I would guess 4 hours
I haven’t tried them either! yet…
I would say same as most harder gels these days
soak in water. at around 2 hours have a look/test
if good drain them. if not leave another 15 mins and repeat until good.
4 hours to get her underpants off. Let me have a go be in 5 seconds
![]()
Nah I don’t need to get them off, just slip em to the side ![]()
Slip to the side and in
![]()
Okay…
Productive morning, at friendly fires place…
UZI comparo…
His… Shorter barrel, Spaced spring, 11v
Mine… better factory fps, longer factory hopup barrel, 7.4 v
We can confirm… the factory hop up does work.
Also… very variable chrono results.
We both had a ‘range’ of fps…consistency was not to be found from a $170 product.
Regardless of chrono results, the mark 1 eyeball saw the gels travelling well.
Lower fps see’s less lateral spread, and we both had no problem hitting a slim tree, at 18 m away.
My uzi got pulled apart, and just a shorter barrel inserted initially…gearbox left std.
FPS actually dropped, for mine.
Original barrel with hopup back in, and gearbox pulled apart.
Excess oil cleaned up ( yes, there was a bit) , and a 10mm spacer put on to the spring retainer.
All back together, with Std hopup barrel, saw the average fps up by about 20 fps.
Now averaging a solid 190-200 fps, with factory hopup on.
That’s probably as good as its gonna get, out of this setup …
Cant post a photo but…
200fps average, at 590 r/min average… on 7.4 v .
good enough for CQB…!
The law of diminishing returns on an undervolumed short barrelled unit. ![]()
At least you got a little bit of a gain out of it.
I was kinda hoping for more like 210-220FPS out of yours with a starting figure of around 170FPS but maybe that’s a little unrealistic for these.
Interesting that I gained about 60FPS out of chopping the IB and spacing the spring, but you really only gained about 20FPS out of the same length spacer… go figure. ![]()
I’m gettin’ pretty fast at whipping those UZI gearboxes out though… ![]()
Yep… big thanks for your help.!!
The volume is tiny…a junkie injecting smack, would have more volume…!!
![]()
Still… 200 ain’t bad…
I might have a play around with other barrels later…
wtf bahahaha not around here haha
Beemer you are credited with a backfire haha
Uzi post spring spacer upgrade…
a more consistent 190-200 fps…
As stated , the uzi with a hopup travels further than the 230 fps EBB M92.
The hopup works pretty well… and keeps lateral spread low…!
Just email your Federal Member, so we can keep our hobby…!!
Gel blasters have absolutely 100% NOTHING to do with the Bondi attack…!!
Leave them Alone.!!
Focus on the nutjob islamic extremists instead…!!
I see from Rok’s latest Youtube content that the factory’s shortened the inner barrel on these UZIs… good move. ![]()
… and I’m guessing the outer barrel is alloy now?
Shame that 14mm CCW barrel’s so long though… it’d look very weird with a suppressor screwed onto it… unless the thread was recessed into the sup far enough so that the can sat back up against the receiver. ![]()
Final stage of development.
11mm slim hop up fitted to the shortened inner barrel and dialled in…
Plastic outer barrel bored out at the receiver end to 11.2mm, neat sliding fit over the hop up.
Still showing high 190-205 FPS, better grouping. But as expected, at longer ranges seems to not hit as hard.
Oh, and a cheeky suppressor because… SMG. ![]()