From bikersmurf’s book, The jokes that never get old, section 7.A, when I think of a silencer, any silencer.
Leaving it at that, just a flat clear coat to go.
Better scale than the first attempt.
Funny what you find for parts… the larger tube is actually from a spool of 30lb braid. Perfect diameter and length. 
2 Likes
a personal favorite for sure!
lol … makes me think of the massive cock and balls someone has spray painted on the back of the local Shell servo, where I pick my kids up from the bus. Highly inapproriate for the location, but kudos to whoever did it for the fkn size & audacity. Been there for 6 months and Shell still havent cleaned it up.
Nope… once the tube / suppressor odysssy begins, there’s no stopping it. 
that does look cool though.
This is the way…
silver painted pvc, aint gonna cut it…
Gotta go full Heinz, on this one…
Might need, a lathe…
Sorry, your address again , please…!!
Strangely enough, I don’t have a lathe anymore… stupidest thing I EVER sold. A turner without a lathe is like a pilot without a plane… yearning to soar amongst the clouds with no way of acheiving it.
Which is why, like you, I fall back on tetris methodology, copious amounts of masking tape and bog to make my gear these days. 
Dont worry…
I’ll get a can of Heinz spag bog…
Drill out a small hole, and fire gels through, for splatter effect…!!
Bwahaha……. fkn awesome 
Thanks for these fantastic photos of having together all those SMGs! I was looking for comparison photos of the BF Mac 10 and Mp7 (I was between those two not only for the gel shooting but also for my cosplay costume). I couldn’t find so good side by side images even of the real firearms.
1 Like
I aim to please.!!
Kaboom-tish!
2 Likes
Ok… a few bits and pieces arrived today…
I’ll pop this here, under EFNY…
proper 2x pistol scope, for the EFNY knock off revolver…
Its “not quite right…but good enough…”
The movie revolver had a shorter barrel, and the scope went to near the end
of it. The longer barrel here, makes the scope length appear shorter.
I could see about knocking something up, for the silver 4inch titan revolver…
Somehow attach a rail on the top.
That would be more correct length / ratio.
But, for now, the King arms Evil revolver has the attached rail, so…
Quick knock up / mock up, of the 4’ titan with scope…
That actually looks more " correct" and has me interested…
There has to be some way, of getting some rails to fit, without damaging the blaster…
Hmmm…
After xmas…
1 Like
There is… you just drill and tap a couple of M3 holes into the top of the frame then shape a piece of pic rail to fit. 
Then the whole “Hollywood Excess” thing wouldn’t be permanent aside from a couple of threaded holes.
Easy peasy, lemon squeezie.
The lower bottom surface, of the upper rail on the AW Evil revolvers, is tapered to sit around the rear sight.
It allows it sit “down and on” the top, without interfering…
Might be a tad difficult to replicate…
Hmm…
That scope does look better, on a smaller revolver though…
" Who Am i.?.?
Your the Duke of New York, A number 1 O.K. …!! "
Correct answer, if you have a Mac 10 on you…!!
Answer with this , later on…
from xforce, the 4 inch Hwasan chrome revolver, on clearance…
I found this one, kinda by accident, searching for revolvers…
Its made in Taiwan, so the all metal is a pretty reasonable Alloy.
Quite sturdy, the chrome is very gleamy, but shows up finger prints easily.
Don’t rob a bank with it…!!
I liked it, because it came included with an 8 slot and 4 slot pic rail, ready to go… and was on clearance.
Also, the closest resemblence, to the S&W model 67 they used in the movie.
4 inch barrel, older classic look…this is closer in appearance than the 4’ Titan.
Problem child with performance though, it fires trimmed down darts at 450 fps…and comes with a mod barrel to install for gels. You need to drill out the internal threads, at the front of the barrel, to get the new gel barrel in…and modify the rear of the barrel as well. Then , it does gels at 400-450, like the SRC titan…
I havent mucked around firing anything yet…
If you look carefully, the rail is mounted forward.
It could do with some fettling, and rearward movement.
At the moment, the scope is only attached via the forward scope ring. The rear one is free in space, near tghe rear sight.
Taking the rear sight off, moving the rail rearwards, and drilling new screwholes to attach, would fix it…
Finally, comparo of 4’… vs … Burton’s Big Bad Behemoth Banger…
Burton is big, bulky, heavy and ridiculously oversized…just as RE (or Hollywood) would have it.
The 4 inch is nice and light and compact…i’ve never fired a scoped revolver before…but i see the appeal…
Burton is also sporting the new wooden grips…they finally arrived…!
Enough for now…
Looks very Hollywood, Beemer…
Nice work!
But there is a legit reason serious shooters use RMR sights on their pistols and not teles…