Uh oh… 
There goes the neighbourhood. 
Do you mean full sized UZi…
or the mini-uzi, like this…??
I swear, they must read the forums, wait till we move heaven and earth to do private modification models…
Then bring some genuine ones in…!!
1 Like
Full size my friend full size. I had it in my hands this morning. Vas did a live on FB showing new arrivals yesterday or day before.
Thats the UZI-PRO version.
Been around for a while( via import), but must be Vas’s first time bringing em in.
The full size version, was the piccy FF posted above…the model he went to great lengths to shoehorn a mp-9 gearbox, into a Metal cap gun base.
You might have missed it, if you haven’t been around for awhile…
1 Like
That’s an ugly orange mag primer handle on that uzi pro
Phew… that’s a relief! 
@BME What you said about monitoring the forum then releasing production versions of the customs?
If they’re not doing that, they should be… no better way to see what’s tickling people’s fancy within the community. 
1 Like
It’s just a shipping protection
Just my opinion but I reckon the little UZIs look like they’ve been smashed with a much bigger ugly stick.
I’m seriously considering buying another LeHui MP9, lopping off the foregrip and removing the folding stock… stripping it down to make it a B&T TP9 clone. Would make a very good sidearm.
Now that would be seriously sexier than an UZI mini. 
1 Like
I feel like this is all I can have…
and even then it’s questionable.
Picked up the “non-functional” JM ACR this morning. Looks like it’s hardly been used since new…
Found an XT30 to JST adaptor cable, powered it up, pulled the trigger and… pew pew pew… feeds flawlessly, nothing faulty with it at all. I’ll call that a win for $40. 
Had the odd issue though… missing a body pin for the upper receiver but a spare Kriss Vector body pin did the job with a little fettling. The folding rear sight was broken but it’s now sporting a rear sight from… you guessed it… a Kriss Vector. 
Missing flash hider was replaced with a longer XM-177 style moderator because I have a soft spot for the look of them. Whacked on an ACOG sight for bling factor.
Swapped over to XT30 on the battery wires so it’ll take all my lipos. This thing’s bog stock, so the horrid acrylic inner barrels getting binned and it definitely needs an outer barrel stabiliser to stop lateral wobble but they’re not hard to source online. No doubt it’s running the OEM Jin Ming gearbox so a spring and o ring upgrade will be next on the to do list.
I reckon it’ll be a half decent platform for a DMR build… now where’s that spare LPVO? 
3 Likes
Fkn bargain. Can’t argue with that price
1 Like
Knowledge > ignorance…
Win for the day…!!
I’ll be interested to see how your goes post upgrade …i’ve got an old tan one lying around…
Easy enough to get these things in the high 200s low 300s… but I’m aiming for 280ish… that’s the sweet spot and being a nylon Gen 9 box you definitely don’t want it overstressed or it’s kaboom time for the box shell.
Might even look at putting a full metal CYMA gearbox in it… I know the mag terminals line up because CYMA mags work with a tweak to the mag retainer slot.
If I keep the nylon box in it I’ll be building up around the A/R latch post too with high strength epoxy… that’s a well known failure point for the Gen 9s.
On the chrono this is only hitting around 220, no doubt the o ring’s seen better days… easy upgrades though. Should be fun… nostalgic even.
Sorry pal no bouno on the ACR stuff I mentioned. Spent a decent time yesterday and today digging through my parts.
I have a vague recollection of them hitting the fire when my friend got out of blasters when they were regulated here and I had a big clean out and re organise as it was getting beyond the joke
It was just a barrel stabiliser, t piece and the DK J10 hopups but I have them still for a few of mine as spares.
Just wanted let you know so go shopping tiger. 
No problemo at all, Señor Maiphut. 
Muchos gracias for looking.
I think I’ll have a crack at making my own stabilizer anyway… from alloy. Should be easy enough.
Grassy ass munchoochass amigo.
Be good to see an ACR revived And hell yea some metal, I like your thinking
I recently got a j10r for a deal… when it feeds does 220-270fps… very inconsistent and doesn’t always feed… same deal full stock with acrylic barrel.
Have epoxied a alloy barrel in a tpiece already and like you, oring and spring, and reckon I have a few cylinder head and nozzles somewhere.
I have two j9s with mk boxes, only one which I ever use… Thinking of swapping the nylon box from the acr into the disused j9 and pilfering the mk box for the acr.
I am going to print a barrel stabiliser, as even with a quick tweak of the barrel nut it is vastly improved but still they all needed a bit of stabiliser in the handguard.
If my print works I could drop one off to you?
I do believe I still have a couple of brand new, still in the wrapper ACR Barrel Stabilisers in the spare parts pile somewhere.
It would be cool if I could send them to a 3D printing expert such as @saph to scan and punch out a few for any members needing them?