link to the seller of the product, it is expensive but really cool
https://www.airsoftglobal.net/shop/index.php?main_page=product_info&cPath=32_139&products_id=31732
Awesome…!!
I’ll see how treywick goes…
The original 1984 one had a seperate battery pack…!!
This one is better it runs on a small CR123A battery in the small laser unit. The laser unit is then inserted into the tube.
1 Like
How did you get them to ship to Aust.?
I did an enquiry on rates, via address, and it says “Shipping not avail to this country”.
I guess they have a blanket ban, on a/soft.
I cant see an contact email address, to tell them its for gel…
How’d you do it.?
Thanks.
Actually I have same problem. They are not shipping it to Australia. I shipped it to Hong Kong and ask my friend to bring it over here. Without the laser unit it was just a hallow metal tube under the x-ray. The laser unit without the battery was nothing but a small metal cylinder(size of a AA battery). A lot of those airsoft sellers in Hong Kong and overseas will not ship anything to Australia because of the strict Australian custom laws and the everchanging restrictions of the customs (without any good reasons).
Anyway , it is worth it since it is a functional laser unit and made of metal. Photos won’t do it justice , you hold it on your hand feel it. It was so cool.
1 Like
I got a pulse rifle shroud kit, shipped from HK…
But they broke into 2 packages, and sent sea mail.
Customs is getting ridiculous…
That .45 longslide with laser sight is an absolute pearler of a candidate for silicone moulded copies. 
Just don’t think the demand would be there… once our generation dies out people will be saying…
“Huh? Terminator who?”
1 Like
I have recieved upgrades Younger gen don’t seem to even know what day it is sometimes.
Proper Robocop Auto Kit but way too expensive
However buying a KSC Auto 9 is cheaper than converting a M93R into Auto 9
Yeah… i saw that kit…
A while back, i got in a Traywick 3d printed robocop kit.
It took a bit of fettling…but it came up pretty welll…
Thats onto a manual Kele M93… correct trigger guard.
It got dropped , and cracked the base a little.
I may order a new Resin 3d printed one…when i have some more time.
1 Like
My Gun Modify SCAR L (with new buttstock) compare to my CYMA SCAR (with original buttstock)
SCAR with a ACR Style buttstock
1 Like
Not my recent purchase, just a pink hi-capa at JK Army shop in Hong Kong (image provided by my friend)
1 Like
That grip stippling looks like pink fur…
That is cool, pink not my flavour but still somebody will like it. Sights are not lo pro and should be very visible. Cool stuff.
Reminds me of…
It’s the same kind of material as on my John wick pit viper, not the nicest feel on a bare palm but it is grippy.
Mines black tho just to clarify lol
1 Like
How did you go with your soldering?
Havnt got around to getting everything I need for it yet, still need to pull the gearbox apart again and try to fix it
Motivation low and resources short ATM
"If the govt’s going to play hardball…
Then, so to is Arnie…!!"
AMT Hardballer time…!!
The hardballer had been in the back of my mind, for some time.
I also bought a silver AW 1911, with a compensator, for that reason.
Just never really got around tuit…
Inspired by the other one we saw recently, i got a 3d printed kit version, locally in OZ. Seller was in brissy.
$50 kit…not too bad, better than nothing.
It has the (static, no moving parts) longslide pistol replica.
Not too interested in that, just interested in the laser /mount…
Its got the rest of the bits, to assemble it properly.
PLA kit…as you’d expect for $50…
So, in terms of painting it…prime and sand first.?
@DChapo … this is your department… i defer to your knowledge…
The print lines run horizontally, from fore to aft…
1200 wet and dry, encircle the tube, and rub at 90 degrees…??
As opposed to fore and aft…? Or both.??
prime first, then sand, to “fill the gaps”
Then…
50 shades of silver…
Might go to bunnings and get some sample pots, and paint some dowel…
I think a matte silver might be the go…
Hmmm…