Yeah, thats what i was thinking.
my OCD is tingling, with 3 different silvers.
I’d live with all AW frame/slide…one colour…and a replaced safety.
they’re shut today… i might call in 2morrow.
Still…its good , just to have the kit…
Oh, and by the way…
AR-18 thread, and all that…
Massive shout out to @Friendly_Fire fire the mag conversion.
Here it is, in all its glory…
3 Likes
Comparo with the original, overlaying…
Its come up brilliantly…thanks F/F …!!
had to cut it down a little vertically…to fit…but about 1 inch longer than the original.
every inch counts…!!
also slightly more curved looking…
I like it.!!!
Terminator collection almost complete…!!
Now, if you’ll excuse me, i need to go to the local police station, and ask about Sarah Conner…!!
note to self, for future battery changes…
the 4 screws, are adjustment / retention screws.
When you go to insert the black laser, all external screws done up tight… it wont go in the tube.
1 screw protrudes.
Remove it… it then goes in.
Align with the 4 holes…check which hole, best allows laser to shine through. through.
Insert screw and then tighten.
That gets it in place, and holds it here.
adjust other screws , as reqd…
Can you swap the GE safety and slide catch with the AW lower flame? and it take me a while to adjust the laser to make it shot straight through the tube. Anyway it is now done. I guess for now, me and you are the only two person to have a terminator gun (gel blaster) in this country. We have to be proud of ourselves. 
You have open a path for others to import this awesome kit.
That looks awesome beemer. We just might get her out of retirement yet.
It’s the FN Scar of 1911’s 
. Nothing matches, but it still looks good.
I’ll nickname it, … ’ The Clonex" …!!
Something to Watch Out for…!!
i wonder if i could get the upper slide chrome plated…??
Dammit… now i’ve " self-suggested" myself…!!
actually, a long chrome upper slide would look great…closest to the real thing.
I’d prefer that, than a " AW darker all over look".
Hmmm… anyone know where to get good chroming done…??
And not crappy flash chroming, that wont last.?
they had a hard time, cerakoting the KEle slide…crap pot metal.
Would chrome plating be an easier process.??
The Real AMT Hardballer is made of stainless steel not chrome
thats true…
but, all chrome would look pretty swish…!!
Having said that, im guessing pot metal will be difficult to work with…and expensive.
easiest just to change the safety…
mm see other week they are trying with new model to gain some market attention. Nothing new same ole poop.
More interested in the 556 that has been in development for all this year.
Bingo… if you thought cerakoting was tricky…
Remember when the guy told you that all the impurities in the metal were hard to work with? It’d be worse with chrome plating.
Whatever went on would probably peel off pretty quickly.
Figured so…
Stainless look, it is…!
Find that short safety lever…
Or just remove it.
When you see it, the mount pretty covers the lever, on the left side of the AW receiver…
Have you seen these?
The Terminator Hardballer Replica - KIT 1984 FDM or RESIN (Terminator – TraywickDesigns https://share.google/DKyIpmgsfJ3E6ZSEW
Not bad. 
When i got the 3d printed laser sight,it was part of a hardballer 3d kit made locally, in Oz.
Not treywick design, but a local jobby.
It was cheap, local, no b709 required…
The kit was ok…the laser was …adequate.
It was a bit loose, and would need a fair bit of glue to hold it together.
quality standards vary, quite a bit…my overseas wesker kit was rough as…
the laser mount had some printing marks on it.
One word, madichina we used to use.
I suggest you get the short safety lever from Tactical Edge Hobbies or WAT International since they are the agents for AW and WE products in Australia. They may have the part.
Ask Joshua at WAT for help /advise, he is better than the tech guys at Brad’s place. They have the only working VFC H&K G3 GBBR( they done their own conversion on it), Brad selling H&K G3 GBBR for $2000 but it doesn’t work. Not yet ready for customers.